Extech CL500

Free and Total Chlorine Meter

The Extech CL500 is a Free and Total Chlorine Meter. This chlorine tester measures up to 3.50 ppm with 0.01 ppm resolution on its large LCD screen. Complete with free, total and zero chlorine standard solutions, test bottles with covers, free and total chlorine DPD powder (10 pcs), cleaning cloth, 6 AAA batteries, and hard carrying case.

Extech DO210

Compact Dissolved Oxygen Meter

The DO210 is a Dissolved Oxygen Meter which measures DO from 0 to 20.0mg/L, Oxygen Percent from 0 to 100.0% and Temperature with ATC. This meter features Adjustable Altitude and Salinity Compensation as well as min, max and data hold functions. Complete with DO probe with membrane and 39" (1m) cable, two spare replacement membranes, electrolyte, 9V battery and soft case.

Extech DO600

Waterproof ExStik® II Dissolved Oxygen Meter

The ExStik® II DO600 meter displays Oxygen level as percent of Saturation from 0 to 200. 0 percent or Concentration from 0 to 20.00 ppm (mg/L). It features Adjustable Altitude Compensation (0 to 20,000 feet in 1,000 ft. increments), Adjustable Salinity Compensation from 0 to 50 ppt and an analog bargraph for indicating trends. DO600 meter includes a DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48" (1.2m) neck strap.

Extech DO600-K

Waterproof ExStik® II Dissolved Oxygen Meter Kit

The DO600-K is a convenient kit which adds versatility for measuring dissolved oxygen in laboratories or out in the field with a 16-Foot (5m) extension cable and probe weight guard for taking easy measurements in tanks or streams. Complete with ExStik® II DO meter, DO electrode, protective sensor cap, DO603 replacement membrane Kit, 16-Foot (5m) extension cable, weighted probe guard, four 3V CR-2032 batteries, 48-Inch (1.2m) neck strap, and hard carrying case.

Extech DO603

Membrane Kit for ExStik® Dissolved Oxygen Meter

The Extech DO603 is a replacement screw-on membrane kit for the Dissolved Oxygen sensor (DO605) of a DO600 meter.

Extech DO605

ExStik® Replacement Dissolved Oxygen Module

Replacement dissolved oxygen sensor for ExStik® DO meter

Extech DO610

ExStik® II DO/pH/Conductivity Kit

Measures Dissolved Oxygen, pH, Conductivity, TDS, Salinity and Temperature

Extech DO700

Portable Dissolved Oxygen Meter

The 9-in-1 DO700 Kit measures DO concentration/saturation, pH, mV, Temperature, Conductivity, TDS, Salinity, and Resistivity. It features automatic salinity compensation and manual barometric pressure compensation for DO measurements. In addition, it has automatic one button calibration of 4, 7 and 10 pH with a choice of three-point calibration for better accuracy and it provides automatic temperature compensation. Complete with DO probe, pH/mV/Temp electrode, polymer Conductivity cell, pH and Conductivity calibration solutions, batteries and hard carrying case.

Extech DO703

Membrane Caps (3 caps)

The Extech DO703 is a set of replacement or spare Membrane Caps. It is for use with the DO700 Portable Dissolved Oxygen Meter. Comes in a set of three caps. This product comes with a six month warranty.

Extech DO705

Dissolved Oxygen Electrode

The Extech DO705 is a Dissolved Oxygen Electrode. This DO electrode offers a temperature and salinity sensor complete with automatic temperature and salinity compensation as well as manual barometric pressure compensation. For use with the Extech DO700 Dissolved Oxygen Meter.

Extech DPD-CL

Chlorine Accessory Pack

The Extech DPD-CL Chlorine Accessory Pack contains ten packages of free chlorine tablets and ten packages of total chlorine tablets. Each can be used as replacements for the DPD powder tablets included in the CL500 Free and Total Chlorine Meter.

Extech EC-12880-P

12880µS Conductivity Standard (2 Bottles)

Extech EC-12880-P are two bottles of 12880 µS Conductivity Standard, 1 pint each of premade solution. EC-12880-P is for use with conductivity meters like the EC400 ExStik Conductivity/TDS/Salinity Meter or DO610 ExStik II DO/pH/Conductivity Kit.

Extech EC-1413-P

1413 µS Conductivity Standard (2 Bottles)

Extech EC-1413-P are two bottles of 1413 µS Conductivity Standard, 1 pint each of premade solution. EC-1413-P is for use with Extech conductivity meters like the EC400 ExStik Conductivity/TDS/Salinity Meter or DO610 ExStik II DO/pH/Conductivity Kit.

Extech EC-84-P

84µS Conductivity Standard (2 Bottles)

Extech EC-84-P are two bottles of Conductivity Standard, 1 pint each of pre-made solution. EC-84-P 84 µS is for use with Extech conductivity meters like the EC400 ExStik Conductivity/TDS/Salinity Meter or DO610 ExStik II DO/pH/Conductivity Kit.

Extech EC100

Conductivity/Temperature Meter

The Extech EC100 is a waterproof (meets IP65 standard) Conductivity/Temperature Meter with a high-accuracy multi-ranging sensor. Features an auto power off with disable. Units of measure include µS/cm, mS/cm, ppm, and ppt. Featuring adjustable automatic temperature compensation, the EC100 includes a protective sensor cap and four LR44 button batteries. Conductivity standards sold separately (required for calibration).

Extech EC150

Conductivity/TDS/Temperature Meter

The Extech EC150 is a Conductivity/TDS/Temperature Meter with high-accuracy multi-ranging sensor. It features auto power off with disable, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, data hold and low battery indication. The waterproof design withstands wet environment and meets IP65 standard. Includes meter, protective sensor cap, and four LR44 button batteries.

Extech EC170

Salinity/Temperature Meter

The EC170 is a Salinity Meter with Waterproof design (IP65). Measure salinity in aquaculture, environmental studies, ground water, koi ponds, irrigation, drinking water and other applications. Features a High accuracy multi-ranging sensor and Auto Power off with disable. Autoranging with 2 ranges of measurement. Data Hold, Auto Power Off and Low Battery Indication. Complete with salinity sensor, protective sensor cap, and 4 LR44 button batteries.

Extech EC210

Compact Conductivity/TDS Meter

The Extech EC210 is a compact, handheld Conductivity Meter. Its long-life, carbon rod combination electrode measures conductivity, TDS and temperature. The meter features three ranges for conductivity and TDS, plus adjustable temperature compensation factor to maintain accuracy. Units of measure include µS/cm, mS/cm, ppm, °F, and °C.

Extech EC400

ExStik® Conductivity/TDS/Salinity Meter

The Extech EC400 ExStik® features six units of measure, internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, and self-calibration upon power up. The EC400 incorporates the latest microprocessor chip technology and patented sensor technology to enable the simultaneous measurement of conductivity, TDS, salinity, and temperature. With the touch of a button the EC400 allows you the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable. Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48"(1.2m) neckstrap.

Extech EC405

ExStik® Replacement Conductivity Cell Module

The Extech EC405 is an ExStik® Replacement Conductivity Cell Module. For use with the EC400 Conductivity/TDS/Salinity Meter. It is an easy to clean, rugged conductivity cell module. Product comes with a protective connector cap and a one year warranty.

Extech EC410

ExStik® Conductivity/TDS/Salinity Kit

EC410 kit includes EC400 ExStik® Conductivity/TDS/ Salinity Temperature Meter, with sensor, protective cap, three calibration standards, (30mL bottle each), weighted base, 3 sample plastic cups, with caps, four 3V CR-2032 batteries, 48 in. (1.2 m) neck strap, and carrying case. Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution. Automatic Temperature Compensation of 2% per °C. Data Hold, Auto Power Off and low battery indication. Internal memory stores up to 25 labeled readings for easy recall.

Extech EC500

Waterproof ExStik® II pH/Conductivity Meter

The EC500 is Conductivity/TDS/Temperature Meter. Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode. Analog bargraph indicates trends. Memory stores up to 25 labeled readings. Waterproof meter with high-accuracy multi-ranging sensor. Features Auto Power off with disable. Complete with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

Extech EC505

ExStik® Replacement pH Electrode/Conductivity Cell Module

The EC505 is an ExStik® Replacement pH Electrode/Conductivity Cell Module. For use with the Extech EC500 Waterproof ExStik® II pH/Conductivity Meter. Measures conductivity, TDS, salinity, pH and temperature. Comes with a year warranty.

Extech EC510

Waterproof ExStik

The EC510 is a conductivity testing kit. Kit includes EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case. Measures 5 parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Analog bargraph indicates trends. Memory stores up to 25 labeled readings. Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio.